[meteorite-list] Japanese Space Probe Reaches Asteroid

From: Ron Baalke <baalke_at_meteoritecentral.com>
Date: Mon Sep 12 19:27:44 2005
Message-ID: <200509122326.j8CNQY921174_at_zagami.jpl.nasa.gov>

http://space.com/missionlaunches/050912_hayabusa_update.html

Japanese Space Probe Reaches Asteroid
By Leonard David
space.com
12 September 2005

The Japanese space probe Hayabusa has approached within 12 miles (20
kilometers) of its target, asteroid Itokawa (1998 SF36).

Scientists at Japan's Institute of Space and Astronautical Science
(ISAS) have been monitoring the day-by-day closing in on the asteroid by
their craft. ISAS is a research arm of the Japan Aerospace Exploration
Agency (JAXA).

The plan is for Hayabusa to depart Itokawa carrying onboard samples of
asteroid Itokawa, and then head back to Earth. The probe's sample return
canister would parachute back to Earth in June of 2007.

Hayabusa was launched from Japan onboard an M-V-5 rocket on May 9, 2003.

There are four major space engineering tasks in the Hayabusa mission:
electric propulsion, autonomous navigation, collecting samples from an
asteroid, and returning those specimens to Earth.

The touchiest and most difficult aspect of the mission is clearly
gathering asteroid samples. The spacecraft will descend by autonomous
adjustments of its propulsion engine -- while transmitting images of the
whole process to Earth.

Due to spacecraft's distance from Earth and the communications lag --
some 10 minutes -- most of the essential decisions have to be made by
the spacecraft itself.

According to ISAS updates on the mission, the spacecraft will release a
target marker onto the asteroid. This small marker is to glow brightly
on the asteroid's surface, reflecting light from a flash beam
transmitted from the spacecraft. The probe uses onboard gear, including
a laser ranging device, to descend to the asteroid.

After making a close approach to the asteroid, and prior to a final
touch down, the spacecraft is to stop using its propulsion engine and
then enters into a free fall descent. This is to prevent the steering
jets on the probe from contaminating the asteroid's surface.

>From this point, the engine stays halt until the completion of sampling.
After the free fall descent, sampling starts as soon as the landing of a
sampler horn on the asteroid surface is detected. Right after sampling,
the spacecraft starts the engine, immediately lifts off, and resumes its
hovering position above the asteroid.

If successful, Japan's Hayabusa mission would be the first spacecraft in
history to return samples from an asteroid.
Received on Mon 12 Sep 2005 07:26:34 PM PDT