[meteorite-list] Mars Exploration Rover Update - August 16, 2004

From: Ron Baalke <baalke_at_meteoritecentral.com>
Date: Mon Aug 16 18:56:17 2004
Message-ID: <200408162256.PAA01688_at_zagami.jpl.nasa.gov>

http://marsrovers.jpl.nasa.gov/mission/status.html

OPPORTUNITY UPDATE: Abrading 'Axel Heiberg' - sol 192-195,
August 16, 2004

On sol 192, Opportunity drove down slope in "Endurance Crater" to reach
a rock dubbed "Axel Heiberg." The rover arrived in position to approach
a particular point for work in this area with its instrument deployment
device (the rover arm). Favorable geometry for an overnight
communications pass with Mars Odyssey motivated the team to keep the
rover out of deep sleep mode and take advantage of the pass. About 115
megabits of data were returned in this overnight pass.

The rover started sol 193 with some cloud imaging at about 8:45 a.m.,
local solar time. This required some heating of the camera mast motors
and bearings. The observations were acquired, though one of the heaters
apparently did not heat as planned. Engineers believe a thermostat
controlling that heater had already opened. This rendered the heating
circuit inoperable so that even though the heater switch was commanded
on and off correctly, the heater itself never got powered. This probably
resulted in use of the mast actuator at lower-than-intended
temperatures. Rover team members are investigating this, and in the
meantime they will not command the rover to perform mast activities at
that time of morning.

After the early morning activities, the rover was commanded to approach
a target on Axel Heiberg for grinding with the rock abrasion tool. The
drive was designed and executed to compensate for slip, and the result
was very precise. The rover also made additional remote-sensing
observations, then it went into a deep sleep for the night to save energy.

On sol 194 the rover took microscopic imager pictures of a spot on Axel
Heiberg, and then performed a grind with the rock abrasion tool to get
access to subsurface chemistry. The grind went well, but the targeting
was a little off (the hole was about 6 centimeters - about 2.4 inches -
to the left of the intended target.) After some investigation it was
determined that there is an error in the way one of the ground tools
represented the commanded position. This error has existed previously,
but the team has never detected it to be this large. It is now being
fixed. The exact positioning of the rover and the arm, and the nature of
the activity all combined to make the error particularly large in this
instance. After the grind, the rover placed the alpha particle X-ray
spectrometer on the hole to measure the rock's elemental composition
early the next morning.

On sol 195, which ended on Aug. 11, the rover acquired post-grind
microscopic images and placed the Mossbauer instrument on the hole to
take a reading all afternoon, plus an additional reading after wakeup on
the morning of sol 196. The rover also made remote-sensing observations,
including images to help assess where it might drive next.
Received on Mon 16 Aug 2004 06:56:05 PM PDT


Help support this free mailing list:



StumbleUpon
del.icio.us
reddit
Yahoo MyWeb